Steering Assist - 6RF 909 144 J
Coding for Steering Assist 6RF.909.144J on Polo
6RF 909 144 J
:H28 /
:0401
Coding: 00 00
Coding: 00 00
label:
6Rx-909-144-V1.clb
- Complete log #289 for Polo 2014 (11 control modules, scanned at 11.04.2024)
- Logs for Volkswagen Polo 2014
- More items 6RF.909.144J
Faults: 2
Fault 0196: Supply voltage
: Voltage too Low
: Voltage too Low
| Byte 0
[00]
/ Binary: 00000000 |
|
|---|---|
| ☐ bit 0 | |
| ☐ bit 1 | |
| ☐ bit 2 | |
| ☐ bit 3 | |
| ☐ bit 4 | |
| ☐ bit 5 | |
| ☐ bit 6 | |
| ☐ bit 7 | |
| Byte 1
[00]
/ Binary: 00000000 |
|
|---|---|
| ☐ bit 0 | |
| ☐ bit 1 | |
| ☐ bit 2 | |
| ☐ bit 3 | |
| ☐ bit 4 | |
| ☐ bit 5 | |
| ☐ bit 6 | |
| ☐ bit 7 | |
Address 44: Steering Assist (J792) Labels:* 6Rx-909-144-V1.clb
Part No SW: 6RF 909 144 J HW: 6RF 909 144 J
Component: EPS_ECU H28 0401
Dataset Number: 6RF074v____ 6010
Coding: 0000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisUDSNSK 005005
ROD: EV_SteerAssisUDSNSK.rod
VCID: 53A5CA4B3AF541092E-8006
2 Faults Found:
0213 - Function Restriction due to Faults in Other Modules
U1113 00 [10001001] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 17
Reset counter: 50
Mileage: 90903 km
Date: 2024.04.09
Time: 00:00:34
Voltage terminal 15: 9.227 V
Voltage terminal 30: 9.828 V
Engine RPM: 0.00 /min
Vehicle speed: 30 km/h
Status: Wait
0196 - Supply voltage
U1011 00 [00001000] - Voltage too Low
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 90
Mileage: 90903 km
Date: 2024.04.09
Time: 00:00:33
Voltage terminal 15: 9.214 V
Voltage terminal 30: 9.817 V
Engine RPM: 0.00 /min
Vehicle speed: 8 km/h
Status: Wait