Batt. Chrg. - 1EA 915 684 FE

Coding for Batt. Chrg. 1EA915684FE on Enyaq

1EA 915 684 FE :H65 / :2022
Coding: 10  80 
label: 1EA-915-684.clb
Faults: 0
# Byte 0 [10] / Binary: 00010000
bit 0  
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 1 [80] / Binary: 10000000
bit 0  
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7   
Address C6: Batt. Chrg. (J1050)       Labels:| 1EA-915-684.clb
   Part No SW: 1EA 915 684 FE    HW: 1EA 915 684 BM
   Component: HV_CHARGER    H65 2022  
   Serial number: 93373WDT00072   Dataset Number: V03935328RP 0001
   Coding: 1080
   ASAM Dataset: EV_OCCXPhase1KLOMEB01B 002019
   ROD: EV_OCCXPhase1KLOMEB01B.rod
   VCID: 035372CE0B936BC2129-8056
 
1 Fault Found:
3280899 - Charging Station 
          B1AD0 F0 {109} - Identification Failed
          {ETHTRCV_30_AR7000_SLAC_STEP_3_PARAM_REQ_Timeout}
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 40
                    Mileage: 10 km
                    Date: 2023.07.12
                    Time: 10:43:51
 
                    DID 1DA0: AC main charge
                    DID 1DAC: Charging
                    Frequency: 1000 Hz
                    Control voltage: 5884.0 mV
                    Duty cycle: 16.2 %
                    Activation charge cover lock charge socket A: not requested
                    Lock for high-voltage charging connector: locked
                    Status connect. recognition: detected
                    Charge socket temperature sensor AC: 30.0 °C
                    Temperature sensor 1: resistance value: 1035 Ohm
                    DID 15E2: 20.0 °C
                    DID 081C: 2125 W
                    DID 081D: 2169 W
                    DID 081E: 2160 W
                    DID 0286: 13.3 V
                    DID 497C: not active
                    DID 537A: 14.4 V
                    DID 1525: 3215 mV
                    DID 4219: High voltage power off not recognized
                    DID 5372: 19.0 °C
                    No. of lockings: 13
                    No. of connections: 3
                    Number of successful charging connector locks: 5
                    Wake-up counter: contact (proximity): 0
                    Wake-up counter: Control Pilot: 0
                    Charging standard abort: status: not active
                    Loading plan: status: Not available
                    Price/performance table: status: Not available
                    Transport Layer Security (TLS) status communication: not active
                    DID 103A: supported
                    number_evse_slac: 0
                    PLC_modem_status: active
                    number_slac_attemps: 1
                    DID 1033: SLAC_active
                    DID 1038: no_description
                    DID 1039: supported
                    Target HV charge current: 17.6 A
                    Powerline communication: charging process status: Standby