Lane Change 3Q0 907 566 E coding and module information (3Q0907566E)

Coding for Lane Change 3Q0907566E / 3Q0907566

3Q0 907 566 E :H16 / :0510
Coding: 16  C0  02 

label: 3Q0-907-566.clb
# Byte 0 [16] / Binary: 00010110
bit 0 ☐ 
bit 1 ☑ 
bit 2 ☑ 
bit 3 ☐ 
bit 4 ☑ 
bit 5 ☐ 
bit 6 ☐ 
bit 7 ☐ 
# Byte 1 [C0] / Binary: 11000000
bit 0 ☐ 
bit 1 ☐ 
bit 2 ☐ 
bit 3 ☐ 
bit 4 ☐ 
bit 5 ☐ 
bit 6 ☑ 
bit 7 ☑ 
# Byte 2 [02] / Binary: 00000010
bit 0 ☐ 
bit 1 ☑ 
bit 2 ☐ 
bit 3 ☐ 
bit 4 ☐ 
bit 5 ☐ 
bit 6 ☐ 
bit 7 ☐  
Address 3C: Lane Change (J769)       Labels:| 3Q0-907-566.clb
   Part No SW: 3Q0 907 566 E    HW: 3Q0 907 566 
   Component: MRR1Rear      H16 0510  
   Revision: --------    
   Coding: 16C002
   Shop #: WSC 00046 000 00000
   ASAM Dataset: EV_RearRadarS1BoschVW48X 001007
   ROD: EV_RearRadarS1BoschVW48X.rod
   VCID: 3A38E4DCBD93E8561D-806E
 
1 Fault Found:
1188157 - Databus 
          U1122 00 [009] - Implausible Message
          [databus unreasonable message - Perso_Status]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 232
                    Mileage: 115442 km
                    Date: 2020.09.04
                    Time: 10:28:00
 
                    Control Module temperature: 37 °C
                    Voltage terminal 30: Measured value not available
                    Vehicle speed: 0.00 km/h
                    Terminal 15 status: Measured value not available
                    Voltage terminal 15: 11.90 V