Back-up Cam - 5Q0 907 441 A

Coding for Back-up Cam 5Q0907441A on A3

5Q0 907 441 A :H07 / :0140
Coding: 02  73  00  01  02  01  00  03  00 
label: 5Q0-907-441.clb
Faults: 0
# Byte 0 [02] / Binary: 00000010
bit 0-23
# Byte 1 [73] / Binary: 01110011
bit 0  
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 2 [00] / Binary: 00000000
bit 0  
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 3 [01] / Binary: 00000001
bit 0-7
# Byte 4 [02] / Binary: 00000010
bit 0  
bit 1  
bit 2  
bit 3-4
bit 5   Automatic Transmission installed
bit 6   Camera integrated into Swinging/Swivelling Logo
bit 7  
# Byte 5 [01] / Binary: 00000001
bit 0   Rear View Camera installed
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 6 [00] / Binary: 00000000
bit 0  
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 7 [03] / Binary: 00000011
bit 0   Rear View Camera Mode 1 (Diagonal Parking) active
bit 1   Rear View Camera Mode 2 (Parallel Parking) active
bit 2   Rear View Camera Mode 3 (Trailer) active
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 8 [00] / Binary: 00000000
bit 0  
bit 1  
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
Address 6C: Back-up Cam. (J772)       Labels:| 5Q0-907-441.clb
   Part No SW: 5Q0 907 441 A    HW: 5Q0 907 441 A
   Component: MQB RVC Mid   H07 0140  
   Coding: 027300010201000300
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_2CamSysRearPASE 006016
   ROD: EV_2CamSysRearPASE.rod
   VCID: 3041E94C6BBF7BCF17-8064
 
1 Fault Found:
13705989 - Databus 
          U1123 00 [008] - Received Error Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 55
                    Reset counter: 204
                    Mileage: 35212 km
                    Date: 2019.11.02
                    Time: 21:03:06
 
                    CAN communication