AccStart Auth 3Q0 959 435 L coding and module information (3Q0959435L)

Coding for AccStart Auth 3Q0959435L / 3Q0959435L

3Q0 959 435 L :037 / :1204
Coding: 13  2C  0C  07  23 

label: 5Q0-959-435.clb
# Byte 0 [13] / Binary: 00010011
bit 0   KESSY Door Handle Driver's Door installed
bit 1   KESSY Door Handle Passenger Door installed
bit 2   KESSY Door Handle Rear Left installed
bit 3   KESSY Door Handle Rear Right installed
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 1 [2C] / Binary: 00101100
bit 0   Passive Entry Door Handle for Driver Door NOT active
bit 1   Passive Entry Door Handle for Passenger Door NOT active
bit 2   Passive Entry Door Handle for Rear Left Door NOT active
bit 3   Passive Entry Door Handle for Rear Right Door NOT active
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 2 [0C] / Binary: 00001100
bit 0   Passive Exit Door Handle for Driver Door NOT active
bit 1   Passive Exit Door Handle for Passenger Door NOT active
bit 2   Passive Exit Door Handle for Rear Left Door NOT active
bit 3   Passive Exit Door Handle for Rear Right Door NOT active
bit 4   Locking for Door Slamming active
bit 5  
bit 6  
bit 7  
# Byte 3 [07] / Binary: 00000111
bit 0   Automatic Transmission installed
bit 1   S-Contact Shut-Off after Timeout active
bit 2   Automatic Terminal Shutdown via Energy Management active
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
# Byte 4 [23] / Binary: 00100011
bit 0   Automatic Terminal Shutdown for Comfort Switching
bit 1   Automatic Terminal 15/S-Contact Shutdown if Vehicle is being locked externally
bit 2  
bit 3  
bit 4  
bit 5  
bit 6  
bit 7  
Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
   Part No SW: 3Q0 959 435 L    HW: 3Q0 959 435 L
   Component: VWKESSYMQB    037 1204  
   Revision: 00037000    Serial number: 0496067171
   Coding: 132C0C0723
   Shop #: WSC 00020 999 00000
   ASAM Dataset: EV_KessyHellaMQBAB 004046
   ROD: EV_KessyHellaMQBAB_VW27.rod
   VCID: 43D34DCA1B18CA9FC3F-8016
 
2 Faults Found:
65794 - Function Restricted due to Insufficient Voltage 
          U1400 00 [008] - -
          [Function restriction due to temp low voltage]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 42
                    Mileage: 12 km
                    Date: 2019.02.06
                    Time: 09:56:47
 
                    Terminal_15_Kessy_specified_value: On
                    Terminal_15_Kessy_actual_value: On
                    Terminal_15_central electric_actual_value: On
                    Terminal_15red_Kessy_specified_value: On
                    Terminal_15red_Kessy_actual_value: On
                    Terminal_S_Kessy_specified_value: On
                    Terminal_S_Kessy_actual_value: On
                    Terminal_S_central electric_actual_value: On
                    Terminal_50_Kessy_specified_value: OFF
                    Terminal_50_Kessy_actual_value: OFF
                    ZAT_pressed: OFF
                    Park selector lever position: Engaged and locked
                    Request active: Condition not met
                    Enabling Steering Column Lock: Condition not met
                    Enabling immobilizer: Condition met
                    No active error mode: Condition met
                    Key signature validity: Condition met
                    Control Module Voltage: 8.591 V
                    Driver information key position copy workshop: not active
                    Driver information: roll warning: not active
                    Driver information: emergency shutdown: not active
                    Internal_key_position: no_message
                    Driver information comfort switching: not active
                    Vehicle speed: 0.0 km/h
                    Engine speed: 0.0 /min
                    Status of vehicle locking: Vehicle unlocked
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: coded
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: coded
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: Not coded
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: Not coded
                    Driver door: closed
                    Front Passenger Door: closed
                    Left rear door: closed
                    Right rear door: closed
                    Active_LF_scans: Init
                    ID sensor 1 authentication: status: No response
                    ID sensor 2 authentication: status: No response
                    ID sensor 3 authentication: status: No response
                    ID sensor 4 authentication: status: No response
                    SPN_Byte 0: 00
                    SPN_Byte 1: 00
                    SPN_Byte 2: 00
 
1077250 - Transport Mode Active 
          U1105 00 [137] - -
          [Transportmodus active]
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 30
                    Reset counter: 2
                    Mileage: 6 km
                    Date: 2018.11.13
                    Time: 09:15:21
 
                    Terminal_15_Kessy_specified_value: On
                    Terminal_15_Kessy_actual_value: On
                    Terminal_15_central electric_actual_value: On
                    Terminal_15red_Kessy_specified_value: On
                    Terminal_15red_Kessy_actual_value: On
                    Terminal_S_Kessy_specified_value: On
                    Terminal_S_Kessy_actual_value: On
                    Terminal_S_central electric_actual_value: On
                    Terminal_50_Kessy_specified_value: OFF
                    Terminal_50_Kessy_actual_value: OFF
                    ZAT_pressed: OFF
                    Park selector lever position: Not engaged and not locked
                    Request active: Condition not met
                    Enabling Steering Column Lock: Condition not met
                    Enabling immobilizer: Condition met
                    No active error mode: Condition met
                    Key signature validity: Condition met
                    Control Module Voltage: 12.499 V
                    Driver information key position copy workshop: not active
                    Driver information: roll warning: not active
                    Driver information: emergency shutdown: not active
                    Internal_key_position: no_message
                    Driver information comfort switching: not active
                    Vehicle speed: 0.0 km/h
                    Engine speed: 0.0 /min
                    Status of vehicle locking: Vehicle unlocked
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: coded
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: coded
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: Not coded
                    Approach to the inside: not active
                    Actuation to the inside: not active
                    Approach to the outside: not active
                    Actuation to the outside: not active
                    Pulling actuation: outside door handle: not active
                    Coding information: Not coded
                    Driver door: Open
                    Front Passenger Door: closed
                    Left rear door: closed
                    Right rear door: closed
                    Active_LF_scans: Init
                    ID sensor 1 authentication: status: No response
                    ID sensor 2 authentication: status: No response
                    ID sensor 3 authentication: status: No response
                    ID sensor 4 authentication: status: No response
                    SPN_Byte 0: 00
                    SPN_Byte 1: 00
                    SPN_Byte 2: 00